Skip to main content

This site requires you to update your browser. Your browsing experience maybe affected by not having the most up to date version.

Zk-5kx Manual ((better)) -

Create the web.

Silverstripe CMS is the intuitive content management system and flexible framework loved by editors and developers alike. Equip your web teams to achieve outstanding results.

Try the demoDownload Silverstripe CMS for yourself

Zk-5kx Manual ((better)) -

Connect your power source here (e.g., a laptop power brick or battery). OUT+/OUT-: Connect your load or device here. 3. Basic Operations How to Set Voltage and Current

Press the button again while in the voltage setting interface to switch to the current limit ( A ) setting.

Ensure the "ON/OFF" indicator is active. Short press the encoder knob to toggle the output on and off.

In the normal interface, short press the button. A digit will flash. Zk-5kx Manual

3 Seconds # Example: 3 10 # → Lock stays open for 10 seconds.

Rotate the encoder knob until the display current matches the real-time reading on your multimeter.

To extend the lifespan of your Zk-5kx, the manual dedicates a final section to preventative maintenance. Connect your power source here (e

If the voltage or current readings on the LCD display deviate from a calibrated external multimeter, use the manual calibration mode. Voltage Calibration Power down the module.

Before using the Zk-5kx, please read and follow these safety precautions:

The load demanded more total wattage than the module's rated configuration. If you have added a cooling fan and heavy heatsinks, manually increase the OPP ceiling up to 121W in the SET menu. Basic Operations How to Set Voltage and Current

The ZK-5KX allows you to decide whether the output is active (ON) or inactive (OFF) when power is first applied.

I can provide more troubleshooting tips for this module if needed. Let me know: What are you using for the input? What load or device are you trying to power or charge?

A: This is common. For zeroing out a small offset current when no load is connected, simply long-press the rotary encoder for 2 seconds on the main screen. The system will automatically perform a zero-calibration.