To install and set up the Xycd60:
: Here, your battery is the input, and your load (e.g., a DC light) is the output. Set "UP" to the maximum voltage you allow (often left high as a failsafe). Set "dn" to the minimum safe voltage for your battery (e.g., 11.0V for a 12V battery). As long as the battery voltage is above 11.0V, the module will power your light. If the voltage drops to 11.0V, it will disconnect the light, preventing your battery from being drained completely and permanently damaged. xycd60 manual
Used to prevent over-discharging. The relay connects the load to the battery when the voltage is high enough ( UP ) and cuts the power when the battery drops to the lower limit ( dn ) to protect the cells. 2. Technical Specifications XY-CD60 Lithium Battery Charge Controller ... - ICStation To install and set up the Xycd60: :
Here are some frequently asked questions about the Xycd60 manual: As long as the battery voltage is above 11
Given the ambiguity of the model number, here is a final guide to help you find the correct information:
Features include automatic power-off and time-limited charging to extend battery longevity.
Short-press SET to cycle through parameters: UP: Upper limit voltage. dn: Lower limit voltage. OP: Turn-on time (optional delay).