After manually defining a map, it is critical to test its accuracy.
NefMoto Forums : A common community for discussing XDF and MapPack conversions .
KP files are described as "the WinOLS version of an XDF," containing whatever maps a user wishes to include. They can be imported into WinOLS projects, allowing tuners to work with professionally defined map structures. xdf to kp
Memory addresses, conversion formulas (to change raw hex to usable data like RPM or PSI), axis definitions, and scaling.
For users with programming skills, custom scripts can automate parts of the conversion: After manually defining a map, it is critical
# Convert to KP by writing a simple header + raw pixel data # (This is a simplified KP v1 writer; real KP might require specific magic bytes) with open(kp_path, 'wb') as kp_file: # Write KP header: 4 bytes version, 4 bytes width, 4 bytes height, 1 byte compression kp_file.write(struct.pack('<IIIB', 1, width, height, 0)) # version 1, no compression kp_file.write(pixel_grid.tobytes())
Because of the proprietary nature of KP files, there is no "official" one-click button to turn an XDF into a KP. Users typically rely on three methods: Manual Transcription: They can be imported into WinOLS projects, allowing
If you need assistance setting up your conversion toolchain, please specify your (e.g., Bosch ME7.5, Siemens MS43) and your current WinOLS version so I can provide tailored configuration instructions. Share public link