Total Station Leica | Tcr 1203 Manual

: Access the "Setup" application to define station coordinates and orient the horizontal circle using a known backsight or azimuth. Engineering Surveyor 3. Advanced Functions & Automation

The instrument will boot to the Main Menu. If the electronic level screen does not appear automatically, look for the level icon or press the configured user shortcut.

Use the laser plummet to center the instrument over the ground point. B. Configuring the Instrument

Enter the . Measure this from the ground mark to the center mark on the side of the TCR1203 housing. Step 5.2: Orienting to Backsight Input your Backsight Point ID and its known coordinates. Total Station Leica Tcr 1203 Manual

With the station successfully oriented, you can proceed to the primary field programs. Survey Application Go to -> Survey .

— Ensure your lens is free of condensation or dust. Check if the EDM mode is accidentally set to Prism mode while trying to shoot reflectorless.

Select the Data Type (typically for CSV/TXT or DXF for direct CAD linework). : Access the "Setup" application to define station

Rotate the instrument 90 degrees so it faces the third footscrew.

The is part of the TPS1200+ series, a high-precision total station known for its reflectorless "PinPoint" EDM and advanced target recognition. The primary manuals for this device are the User Manual , which covers basic setup and safety, and the System Field Manual , which provides detailed instructions for surveying applications . Core Operation and Interface

This is where beginners fail. The manual dedicates an entire chapter to PPM (Parts Per Million) correction. If the electronic level screen does not appear

If operating the TCR 1203 in damp or rainy conditions, never store the instrument wet inside its plastic carrying case. Leave the case open in a warm, dry room overnight to allow all internal components to completely dry out.

Define your formatting options (e.g., Point ID, Northing, Easting, Elevation, Code).