Never allow a user onto the lift until the following diagnostic checks are successfully completed:
Understanding the various parts of the Levant stair lift helps with troubleshooting and maintenance. Here are the key components:
The final phase involves rigorous testing of the safety mechanisms. The Levant is equipped with sensitive edges that stop the lift immediately if it encounters an obstacle on the stairs. Installers must verify the limit switches, which tell the lift exactly where to stop at the top and bottom of the run. Finally, a test run with a load—or the user themselves—ensures that the movement is smooth, quiet, and consistent.
Do you have the or the installation kit ready to go? Share public link thyssenkrupp levant stair lift installation manual top
: The Levant can be fitted on staircases as narrow as 740mm.
Check for any unusual noises or jerky movements.
You can install a stairlift yourself, but it's not recommended and can lead to an unsafe installation and use of the lift. Lifeway Mobility DIY Stair Lift Installation: Is It Safe? - Williams Lifts Never allow a user onto the lift until
: Installers must set the upper and lower limit cams to ensure the lift stops accurately at each landing. A final function test confirms that all safety features, such as the footrest sensors (which stop movement if an obstacle is hit) and the swivel seat interlock, are fully operational. Key Specifications & Safety Features Weight Capacity : Supports up to 138 kg (approximately 304 lbs). Safety Sensors
If the staircase requires a multi-piece rail, lay the sections flat on the stairs. Slide the internal joint pins into the channels of the first rail, then butt the second rail tightly against it. Secure the joining plates using the provided hex bolts. Ensure the gear rack teeth align perfectly across the joint. Step 2: Positioning the Rail
Route the trailing cables from the seat (which handle safety switches in the armrests and seatbelt) into the designated ports on the carriage motherboard. 6. Wiring the Charging System Installers must verify the limit switches, which tell
: Ensure the carriage pinion gear meshes smoothly with the steel gear rack running along the rail.
The seat provides both user comfort and critical mechanical leverage.
Regular maintenance extends the life of your stair lift and ensures safe operation. Most maintenance tasks must be performed by an authorized dealer, but some simple cleaning and inspection can be done by the owner.