Thyssenkrupp — Levant Stair Lift Installation Manual !!exclusive!!

The thyssenkrupp Levant is a robust, reliable, and safe solution for straight staircases. While finding a public installation manual is not possible for safety reasons, understanding the process—from rail mounting to programming—empowers you to be a well-informed consumer. When you are ready to install one, rely on certified professionals. This ensures your warranty remains valid, your home remains undamaged, and, most importantly, you remain safe.

Before unpacking the equipment, prepare your workspace and verify all components. Required Tools Metric Allen wrench set (4mm, 5mm, 6mm) Socket wrench set (10mm, 13mm, 17mm) Electric drill and appropriate drill bits (wood or masonry) Screwdriver set (Phillips and flathead) Magnetic torpedo level Digital multimeter Tape measure Component Checklist Ensure your shipment includes these primary packages:

The carriage holds the motor and battery and connects the chair to the rail.

With the structural track firmly anchored, you can now integrate the moving mechanical elements. Step 1: Sliding the Carriage Onto the Rail

Before installing the ThyssenKrupp Levant stair lift, ensure: thyssenkrupp levant stair lift installation manual

The Levant rail must be checked for damage. Ensure the gear rack is secure.

Keep the gear rack clean and lightly lubricated with a factory-approved dry silicone or Teflon spray. Avoid using heavy grease, which attracts hair, carpet fibers, and dust, leading to premature component wear.

The drive unit (the chair carriage) is carefully lifted and placed onto the assembled rail. This is a two-person job to avoid damaging the delicate electronics and gears under the carriage.

After installation:

The Levant is a straight stairlift tailored for straight, non-curved staircases. Known for its compact design, it leaves ample space for people walking up and down the stairs.

Mount the wall charger near your power outlet. Run the low-voltage cable from the charger to the terminals on the rail's end cap.

: The unit uses sealed lead-acid batteries located under the seat [6]. It should remain plugged in at all times to ensure the batteries stay charged [18].

Test both wireless remote controls to ensure the call/send functionality works flawlessly from both landings. 7. Troubleshooting Common Installation Errors Potential Cause Resolution Key switch is off or batteries are disconnected. The thyssenkrupp Levant is a robust, reliable, and

Guide to the ThyssenKrupp Levant Stair Lift Installation Installing a ThyssenKrupp Levant stair lift can significantly enhance home accessibility, often taking only about half a day for a standard setup. While professional installation is strongly recommended for safety and compliance with local licensing laws, understanding the manual's core steps helps you prepare your home for the process. Pre-Installation Checklist

The Levant, which thyssenkrupp has been manufacturing since 1969, is their longest-running product line, renowned for its reliability and sleek design. There are several variations of the Levant, including the Classic, Comfort, and Comfort Plus models, each offering different levels of features such as deluxe seating and automatic swivel functions.

Plug the seat wiring harness into the corresponding port on the carriage control board. This connects the seat belt sensor and armrest controls to the main processor. 5. Wiring and Electrical Configuration