Staples 17466 Laminator Manual [extra Quality] -

The Ultimate Guide to the Staples 17466 Laminator: Manual, Setup, and Troubleshooting

Unplug the machine and wait for it to cool completely. Wipe the outer plastic shell with a microfiber cloth slightly dampened with water. Never use harsh chemical solvents or abrasive pads. 5. Troubleshooting Common Issues

: Plug the unit directly into a grounded wall outlet and flip the power switch located on the back or side. Select Setting : Choose between the staples 17466 laminator manual

The green will light up when the machine is hot enough to begin. Step 4: Preparing the Pouch

| After each use | Wipe exterior with damp cloth. | | --- | --- | | Weekly (if used often) | Run a cleaning sheet (or glossy paper) through to remove adhesive residue. | | Monthly | Check rollers for melted plastic; use warm, damp lint-free cloth on cool rollers. | The Ultimate Guide to the Staples 17466 Laminator:

Ensure you are using thermal pouches for hot, or cold pouches for cold.

No. Never cut a pouch before laminating. Loose or cut edges will catch on the internal rollers, causing a severe jam. Always laminate the full pouch first, let it cool, and then trim it down to size. Step 4: Preparing the Pouch | After each

Lint-free cloth, isopropyl alcohol (90%+), clean paper.