Smartpack2 Touch User Manual Page

Select the specific hardware relay (e.g., Relay 1 on I/O Monitor).

The Smartpack2 Touch is a compact and rugged device that weighs approximately 1.5 pounds and measures 6.5 inches x 3.5 inches x 1.5 inches. The device features:

Elias stood in the humid hum of the telco container, the only light coming from the glowing 4.3-inch screen of the Smartpack2 Touch

Go to Configuration > Shunt. Ensure the correct shunt scaling value (e.g., 500A/50mV) is matched precisely to the physical shunt hardware. Web Interface inaccessible via browser.

The ceiling voltage that triggers a critical alert and may disconnect rectifiers to protect the load. smartpack2 touch user manual

Includes dedicated ports for the CAN bus, Ethernet (LAN), and internal system interface connections. 2. Navigating the Touchscreen User Interface

For more specific troubleshooting or wiring diagrams, you can download the full Smartpack2 Touch User's Guide (PDF) .

The SmartPack2 Touch serves as the central brain for modular power supply systems. It manages rectifiers, batteries, and distribution units.

The graphical user interface (GUI) of the Smartpack2 Touch is designed for intuitive operation. The Home Screen Select the specific hardware relay (e

Features the highest security ratings for remote access and control, protecting critical infrastructure.

: 0003 (required for changing settings like float voltage). Web Login : User admin , Password admin . 2. Common Menu Operations Navigation Path Set Float Voltage

Alarms protect your infrastructure by triggering warnings before critical failures occur. Alarm Levels Standard operational events.

The controller is adaptable, supporting DC power systems from 12V to 380V. Common applications include: Ensure the correct shunt scaling value (e

: Detailed guide (Doc. No. 370013.063) for establishing direct network connections and setting parameters like float voltage and battery charge limits. Key Operational Steps

The currently running on your Smartpack2 Touch Your nominal system voltage (24V, 48V, or 110V)

| Gesture | Function | |---------|----------| | Single tap (center) | Show battery level (LED strip lights 1-5 bars) | | Double tap (center) | Toggle heated pocket ON/OFF (40°C / 104°F) | | Swipe up (long) | Increase brightness of LED strip (3 levels) | | Swipe down (long) | Decrease LED brightness / dim to off | | Swipe left (short) | Output mode: Standard (normal charging speed) | | Swipe right (short) | Output mode: Fast (15W delivery to devices) | | Tap + hold (3 sec) | Emergency alarm (110 dB siren + flashing LEDs) |

Check the CAN bus cabling connecting the controller to the rectifiers. 6. Conclusion