Shifts the active editing digit when changing values, saving scroll time.
for the best results, but here are the standard terminal connections: Description Power Supply Connect to 85-265V AC power source. Relay Output
: Insert the controller through the panel cutout and secure it from the rear using the provided mounting frame. 2. Wiring Diagram
This is the most powerful feature of the MC101, and using it correctly is key to getting stable, precise control.
Terminals 5 and 6 act as a dry contact switch. Connect your load circuit in series through these terminals. Temperature Sensor Input
If you are looking to or integration using this controller, could you tell me: sinotimer mc101 manual
: Connect to terminals 9 (+) and 10 (-) .
Like many budget industrial manuals, some translations can be stiff or use highly technical jargon that might confuse a first-time hobbyist. Small Print:
| Parameter | Specification | | :--- | :--- | | | MC101 (with variants like MC101-611, MC101-911) | | Measurement Accuracy | 0.3% of full scale | | Resolution (TC/RTD) | 0.1°C / 0.1°F | | Resolution (Analog) | 0.001 | | Universal Input | 10 types of T/C (K,J,E,T,R,S,B,N), RTD (Pt100, Cu50) | | Temperature Range | Depends on sensor; e.g., 0-1300°C for K-type | | Display | Celsius (°C) / Fahrenheit (°F) | | Control Output | Relay contact + SSR voltage (one group) | | Alarm Output | ALM1 (Upper-limit bias alarm, configurable) | | Power Supply | 85-265V AC, 50/60Hz | | Dimensions (WxHxD) | 48 x 48 x 85 mm (1/16 DIN) | | Mounting Hole Size | 46 x 46 mm |
: Can be configured with high/low limit alarms to alert users of temperature deviations or system issues.
Press or ▼ to alter the target temperature digit value. Shifts the active editing digit when changing values,
By following this guide, you'll be able to unlock the full potential of your SINOTIMER MC101 PID temperature controller, achieving precise and stable temperature control for your specific application.
Master the Sinotimer MC101: Your Essential Setup & Operation Guide
The MC101's key advantage is its PID algorithm. For it to work optimally, it needs to "learn" your specific system. This is done with the Auto-Tune function. Your manual strongly recommends performing this after initial setup or any significant system change to ensure stability and precision.
The printed on the side sticker of your device
The MC101 supports a wide range of sensor inputs. You will need to configure the controller to match your specific sensor type (e.g., K-type thermocouple, Pt100 RTD). This is done in the parameter settings menu. Connect your load circuit in series through these terminals
The MC101 uses a rear terminal block for all electrical connections. Your manual provides a detailed wiring diagram. However, here is a summary of the crucial connections:
Wiring error on the output load side, or the switched current exceeds the 16A threshold, damaging the relay.
You can switch units in the parameter menu to suit your preference. Cooling Mode:
Connect one of the matching wires (usually B / White).