: Attach the handle and wheels if they aren't already fixed. Connections :
If you are using the black soap nozzle:
Ideal for heavy duty stripping. Great for clearing peeling paint, rust, and deeply embedded grime from concrete or metal. rok power washer instructions new
Screw or snap the spray gun holder onto the side of the frame.
Once the engine starts, smoothly move the choke lever back to the "RUN" position (open). Selecting and Changing Nozzles : Attach the handle and wheels if they aren't already fixed
start the motor or engine without water flowing through the pump, as running it dry can destroy the internal seals.
Pull the starter recoil cord briskly until the engine fires. Move the choke to "OPEN" once the engine is running. 4. Safe Operation and Shutdown How to setup and start a pressure washer Screw or snap the spray gun holder onto
Never let detergent dry on the surface. Never use bleach or acid (it will destroy pump seals).
Hold the trigger down for 30 to 60 seconds. Air will sputter out of the wand, followed by a steady, low-pressure stream of water.
Attach your garden hose to the water inlet, using a quick-connect coupling for best results. 2. Safety Precautions
Switch to the Black Soap Nozzle . Detergent will only draw through the pump when the low-pressure nozzle is attached. Apply detergent to a dry surface from bottom to top.