Once the nozzle reaches temperature, feed the filament into the top of the extruder while pressing the spring-loaded lever.
The X-Pro uses assisted manual leveling via its 4.3-inch touchscreen to ensure a flat printing surface.
QIDI X-Pro Manual Go to product viewer dialog for this item. : The Ultimate Guide to Setup, Operation, and Maintenance The QIDI Tech X-Pro Go to product viewer dialog for this item. qidi x-pro manual
If you encounter persistent clogs or the nozzle is worn from abrasive filaments (carbon fiber, glow‑in‑the‑dark), replace the 0.4 mm brass or hardened steel nozzle. Ensure the hotend is heated to at least 200 °C before attempting to unscrew the old nozzle to avoid damaging the threads.
Select your language and check the voltage selector (110V/220V) to match your region. Bed Leveling: Navigate to Settings > Leveling Once the nozzle reaches temperature, feed the filament
Check the voltage switch (110V or 220V) to match your region before plugging it in. Bed Leveling:
The X‑Pro comes with a removable acrylic enclosure. The top cover simply sits into the slots on top of the printer frame. The two side windows are held on by magnets—match each window to the correct side for a perfect fit. : The Ultimate Guide to Setup, Operation, and
The QIDI X-Pro is a versatile, fully enclosed 3D printer featuring a unique dual direct-drive extrusion system designed for multi-material and multi-color printing. While the machine is largely pre-assembled, effective operation depends on following a precise setup and maintenance routine.
Avoid using special characters in your filenames; the X-Pro firmware may fail to read them. Final Thoughts
The Qidi X-Pro is a high-end 3D printer featuring:
Verify that the voltage switch on the power supply (near the plug) matches your country's standard (115V for USA/Canada, 230V for Europe). Plug in the power cord and turn on the power switch. 3. Mastering Bed Leveling (Calibration)