Pacific Fitness: Del Mar Home Gym Assembly Manual

: Runs from the leg extension arm to the frame, often using a chain for adjustment. Finishing Touches Attach the seat pads, backrests, and press arms.

on YUMPU provides instructions for uprights and top beams that are very similar to the Del Mar's architecture. General Assembly Roadmap

Insert the two guide rods into the holes on the main base. They may lean initially but will be secured by the top beam. Weight Plates:

Place the over the top of the main upright mast and the tops of the guide rods. Secure it to the upright mast using the designated bolts and washers. Step 3: Attaching the Press Arm and Seat Frame pacific fitness del mar home gym assembly manual

Before you begin, gather the following essentials as recommended in the Consumer Strength Equipment Service Manual Wrench Sets:

: The Del Mar requires an operational area of approximately 7 feet by 5 feet.

Starts at the lat pulldown bar hook at the front top frame. It travels backward through the top frame over two or three inline pulleys, drops straight down the back of the upright mast, and connects directly to the top plate selector stem hook. : Runs from the leg extension arm to

Install the leg developer arm to the front of the seat frame using the pivot pin.

Slide the rubber stack bumpers onto the bottom of the two chrome guide rods.

Place the flat on your floor mat in its permanent location. General Assembly Roadmap Insert the two guide rods

Sort your hardware (bolts, washers, nuts) by size before beginning. The Del Mar gym primarily utilizes high-tensile hex bolts, nylon locknuts, and flat washers.

The Pacific Fitness Del Mar home gym is a versatile and comprehensive workout system designed to provide a full-body workout. The system consists of: