Fosroc Nitocote PE135 is a single-component, water-based protective coating primarily used for concrete and masonry highly regarded for its dual-action capability as both a curing compound protective coating , which helps save on both material and labor costs constchementerprises.com Key Features & Performance Dual Purpose:
is a single-component, high-performance protective coating and curing compound formulated from advanced hydrophobic polyester resin . Engineered to shield concrete infrastructures from aggressive environments, this eco-friendly material is completely free of hazardous materials like coal tar pitch and hydrocarbon solvents. This comprehensive article explores its technical features, Material Safety Data Sheet (MSDS) guidelines, and application strategies to ensure maximum performance on your project site. 🛠️ Key Technical Specifications nitocote+pe135+msds+best
According to the Fosroc Nitocote PE135 Technical Datasheet , the chemical properties of the material are fine-tuned to deliver maximum impermeable protection: 1.28 g/cm³ at 20°C. 🛠️ Key Technical Specifications According to the Fosroc
Note: Full chemical and mechanical cure requires . 5. Step-by-Step Application Best Practices For new concrete
Disclaimer: The information in this article is based on publicly available product data and general best‑practice guidance for coating application. Always refer to the official Nitocote PE135 Technical Data Sheet and Safety Data Sheet provided by Fosroc for your specific region before handling, applying, or specifying the product.
The concrete surface must be clean and free of dust, oil, grease, and any loose particles. For new concrete, a waiting period of at least 28 days is recommended to allow the concrete to fully cure and reduce moisture content. The substrate moisture should be measured and be below 16%.
Nitocote EP135 is a solvent-free, two-component epoxy resin coating. It is designed specifically for the long-term protection of concrete and steel substrates. Because it is solvent-free, it complies with stringent volatile organic compound (VOC) regulations, making it an environmentally friendlier option compared to older solvent-borne coatings.