Mikrotik L2tp Server Setup Full Free [NEW]

Before configuration, establish your network parameters. This guide assumes the following environment: 203.0.113.50 (Assigned to ether1 ) Local Network (LAN): 192.168.88.0/24 VPN IP Pool: 192.168.89.10 to 192.168.89.50 Router LAN IP: 192.168.88.1

/ip firewall filter add chain=input protocol=udp port=500,4500 action=accept comment="IPsec" /ip firewall filter add chain=input protocol=ipsec-esp action=accept comment="ESP"

/ip services add name=l2tp protocol=l2tp mikrotik l2tp server setup full

MikroTik simplifies L2TP setup by allowing you to enable built-in IPsec directly from the L2TP server settings. In the menu, click the Interface tab. Click the L2TP Server button at the top. Configure the following in the L2TP Server window: Enabled : Check the box. Default Profile : Select l2tp-profile .

: The IP address of your router (e.g., 192.168.89.1 ) Remote Address : vpn_pool Before configuration, establish your network parameters

Enable the L2TP server and bind it to your WAN interface (or leave "default" to listen on all).

: Define the addresses that will be assigned to VPN clients. IP > Pool > + Name : vpn-pool Ranges : 192.168.89.2-192.168.89.100 (example range) Click the L2TP Server button at the top

His journey began by logging into WinBox and heading to the menu. Here, he carved out a dedicated subnet for his remote workers, naming it vpn-pool with a range of 192.168.89.10–192.168.89.50 . This would ensure every team member received a unique internal address once they connected.