Maudio Axiom Pro 49 Driver Mac Exclusive ~upd~ -
Many users find that by performing a Factory Reset (Hold + and - buttons while powering on), the Mac will recognize the device as a "USB MIDI Device." You won't get the fancy mapping, but you can manually "MIDI Learn" every knob and fader in Logic, Ableton, or Pro Tools. 4. The "Hidden" Community Fixes Some users in the community have reported success by:
If emulation modes fail, switch the Axiom Pro 49 into standard MIDI mode to map controls manually: Press the button on the Axiom Pro. Select a knob or fader you want to map.
Use an official Apple USB-C to USB adapter if your Mac only has USB-C ports. 2. Configure Audio MIDI Setup Open . Navigate to Applications > Utilities . Open Audio MIDI Setup . maudio axiom pro 49 driver mac exclusive
If the screen flickers, connect a 9V DC, 500mA (center-positive) power adapter to the keyboard's power jack. 2. Verifying macOS Recognition
The official M-Audio support page lists the last driver (v1.2.1) as supporting up to . If you are on anything newer, the installer will likely fail or the "Axiom Pro" won't show up in your Audio MIDI Setup. 3. The Workaround: MIDI Mode vs. HyperControl Many users find that by performing a Factory
remains a legendary MIDI controller, renowned for its semi-weighted keys, robust build, and specifically, its HyperControl technology . However, as Apple moves forward with Apple Silicon (M1/M2/M3/M4/M5/M6 chips) and modern macOS versions (Sonoma, Sequoia, and beyond), finding the correct can feel like chasing a ghost. This article serves as the ultimate guide to getting your Axiom Pro 49
Press Cmd + Space to open Spotlight, type , and press Enter. Select a knob or fader you want to map
While basic keys, pads, and MIDI pitch/mod wheels work perfectly out of the box, the proprietary automatic DAW mapping protocol (HyperControl) is obsolete. You will need to use standard MIDI learn to map your faders and knobs. Step-by-Step Connection & Setup Guide
: In most other DAWs, the setup is similar. After adding the Axiom Pro as a control surface, you will look for the specific HyperControl MIDI ports in your input/output drop-down menus. The naming conventions, such as "Axiom Pro HyperControl In/Out" or similar, might vary slightly between operating systems and DAW versions, but the principle of selecting them to establish the bidirectional link remains the same.
| macOS Version | Support Status | Notes and Considerations | | :--- | :--- | :--- | | | Supported (Class-Compliant) | No driver required. Should function via standard USB connection. | | macOS 11 (Big Sur) | Supported (Class-Compliant) | Confirmed compatible for class-compliant devices on Intel-based Macs. M1 support was "in testing" at release. | | macOS 12 (Monterey) | Supported on Intel & Base M1 | Official compatibility confirmed for Intel and base-level M1 processors. M1 Pro/Max were initially "in testing". | | macOS 13 (Ventura) | Support May Vary | Compatibility lists for this generation do not explicitly include the Axiom Pro 49. While class-compliance might ensure basic function, it is not an officially tested device for this OS. | | macOS 14 (Sonoma) | Not Officially Listed | The Axiom Pro 49 is absent from official M-Audio hardware support lists for Sonoma. Use with caution and test thoroughly. | | macOS 15 (Sequoia) | Not Officially Listed | The Axiom Pro 49 is absent from official M-Audio hardware support lists for Sequoia. Use with caution and test thoroughly. |