: Manually copy the current static IP address, subnet mask, gateway, and DNS settings.
Before performing a factory reset on your Konica Minolta Bizhub C258, make sure to:
If you want, I can:
Once you are in Administrator Mode, you can reset the network settings.
Press the physical button on the console. The button will turn from red to blue/green once processing begins. konica minolta bizhub c258 factory reset
Performing a factory reset on a Konica Minolta bizhub C258 is a critical procedure for clearing system errors, wiping data before disposal, or restoring original network configurations. This process clears custom configurations, user data, and address books.
If you are selling or returning the leased equipment, you must format the internal HDD to erase cached documents and image data.
A true factory reset cannot be performed via the standard user menu. It requires access to the technician-level . Follow these steps to access the hidden menu:
If the progress bar freezes for more than 30 minutes, the Hard Disk Drive (HDD) might be failing. You may need to enter Service Mode again and perform a separate physical HDD Format. : Manually copy the current static IP address,
Once the Bizhub C258 reboots, it will prompt you with the initial setup wizard. Use this checklist to return the machine to operational status:
Older bizhub C258 units accumulate digital clutter. A "Reset All Data" does not always purge the hard drive’s hidden sectors. For a true, secure factory reset—especially before selling the machine—you must format the HDD and reinitialize the file system.
While still in the Service Mode menu, select HDD Format .
Performing a factory reset is irreversible. Before proceeding, ensure you have taken the following precautions: The button will turn from red to blue/green
Once the "Trouble Reset" screen appears, tap the button on the screen and restart the machine.
If you ever feel uncertain, or if the device is leased or under a service contract, do not hesitate to contact a Konica Minolta authorized service provider. Their expertise is the safest path to restoring your device's factory state without unintended consequences.
A full initialization may set the Hard Disk Drive (HDD) status to "Not Installed". To fix this: Service Mode Restart the machine again. Quick Reference: Admin Password Reset If you only need to reset the Administrator Password (default is usually 1234567812345678 ), you can do so by navigating to Administrator Settings Security Setting Konica Minolta Do you need help reconfiguring the network settings setting up a new administrator password after the reset?