Firmware Update: Jbl Link 10

[Connect to Wi-Fi] ➔ [Plug into Power] ➔ [Open Google Home App] ➔ [Automatic OTA Update] Step 1: Connect to the Google Home App Turn on your JBL Link 10. Open the on your mobile device.

for 10-15 seconds. Alternatively, you can press and hold the Mute button for roughly 15 seconds until the device restarts. Further Exploration official JBL Support guide

Plug the speaker into a wall outlet using the original micro-USB cable and adapter.

: The speaker must be successfully configured and connected to a functional home Wi-Fi network. jbl link 10 firmware update

Once connected and powered, the device will check for and install updates automatically, typically during the night when not in use.

To check for firmware updates on your JBL Link 10, follow these steps:

for detailed OTA update requirements for the entire Link series. Consult this troubleshooting discussion [Connect to Wi-Fi] ➔ [Plug into Power] ➔

While many smart speakers update automatically, knowing how to trigger the JBL Link 10

Plug the JBL Link 10 into a wall outlet using its micro-USB cable. Do not rely on battery power during an update.

, the JBL Link series (including the Link 10, 20, 300, and 500) updates automatically over-the-air (OTA) via Wi-Fi. Alternatively, you can press and hold the Mute

Locate the on the top or back of the chassis. Press and hold the Mute button for at least 15 seconds .

While the speaker is portable, always plug it into a wall outlet during a firmware update. If the power cuts out during an update, it can damage the software. Check Battery: Ensure the battery has at least 30% charge. 2. The Automatic Process