Look for a rectangular grid of pins sticking straight up from the board.

Before touching the motherboard components, and touch a grounded metal object to discharge static electricity. 1. The Power Switch (PWR_SW) Pins: 6 and 8

Connect the Power LED to pins 5 (Positive) and 7 (Negative). 4. Other Front Panel Connections

If your system fails to post or show activity lamps after mapping the header pins, systematically check the configuration using this diagnostic guide:

Connects to pins 1 (+) and 2 (-) in the bottom row. This is directional; if it doesn't light up, flip the connector.

Locate the 9-pin USB header. The connector is "keyed," meaning it has one blocked hole to ensure it only goes in one way.

If your system fails to fire up after completing the steps above, use these quick diagnostic steps:

This article provides a to the Foxconn N15235 front panel connectors, ensuring you can successfully connect your case to your motherboard. 1. Locating the Front Panel Header on N15235

: If the power or hard drive lights don't work, flip the connector 180 degrees to correct the polarity.

: Align the blocked hole with the missing pin on the motherboard's USB header and push straight down. It only fits one way. Front Panel HD Audio

Note : Some cases provide two separated 1-pin connectors, while others use a unified 2-pin connector. : Plug them onto Pins 2 and 4 (top-left corner).