Fagor Fi-80 Dishwasher Manual Here

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

Check and clean the wash and rinse arms (upper and lower) for scale or debris. Inspect door seals and check chemical levels. Gastroparts 4. Basic Troubleshooting Potential Cause Machine won't start Power fault or door latch not engaged Check main breaker and ensure hood is fully closed. Poor wash results Clogged nozzles or low detergent Clean wash arms; check chemical containers. Not heating Tripped thermal fuse or faulty element Reset thermal fuse; call a service engineer if persistent.

Check the building's water pressure gauge during the rinse cycle (must be above 20 PSI). Replenish the rinse aid chemical container. 6. Chemical Pump Adjustments

Ensure the suction tubes for liquid detergent and rinse aid are fully submerged in their respective chemical containers. fagor fi-80 dishwasher manual

Wait for the cycle light to turn off before opening the door. Let dishes air dry for a few moments before handling. 4. Cleaning and Preventive Maintenance

The Fagor FI-80 Go to product viewer dialog for this item.

Check the plastic and stainless nozzles for hard water scale or food debris. Clean them out using a paperclip or a small pick. This public link is valid for 7 days

The machine will heat the wash tank and rinse booster. Do not start a cycle until the temperature indicators reach their optimal zones: Wash Tank: 150°F to 160°F (65°C to 71°C)

Place dishes in the racks, ensuring they do not block the wash arms.

Understanding the machine’s technical capabilities helps you use it efficiently and choose the right programme for each load. Can’t copy the link right now

Look for cracks or stiffening in the vinyl chemical squeeze tubes. 5. Troubleshooting & Error Codes

The machine will start to fill with water.