Elstat Ems 55 Advanced User Manual New |verified|

Press and hold the Defrost button for 5 seconds. This is inhibited if the cabinet is already above the termination temperature.

The incoming grid voltage dropped below operational limits. The controller will restart automatically once line power stabilizes.

SHI / SLO : The unit has cut power to protect the compressor from voltage spikes or drops.

Energy-saving mode with higher setpoint, possibly with lights off. Defrosting: Compressor off, fan running to clear ice. 5. Technical Specifications

Proper installation is crucial for accurate performance. The advanced manual outlines several critical steps:

Press to confirm. The display will show the first parameter category code. Key Parameter Matrix Parameter Code Description Default Setting Advanced Range Functional Impact SP -5.0°C to 10.0°C Target product temperature during operational mode. HY Hysteresis (Differential) 0.5°C to 5.0°C Temperature rise allowed before compressor re-engagement. SSP Saving Set Point 4.0°C to 15.0°C Target product temperature during Eco saving mode. SHY Saving Hysteresis 1.0°C to 8.0°C Temperature differential utilized during Eco saving mode. SOT Saving Overtime 0 to 480 mins

: Press SET and DEFROST together until AnA displays. Press UP , then SET to view live temperature readouts from the appliance sensor.

The manual contains a comprehensive list of all alarm codes. Always consult it for a complete reference.

Clean the condenser radiator fins; check condenser fan motor. Door Open Alarm Door switch remains open for longer than 15 minutes.

The front LED panel displays specific alpha-numeric fault codes when operational thresholds are breached. PF1: Appliance Sensor Failure

The condenser sensor continuously reads compressor discharge heat.

: If you're unable to find the manual online, consider contacting Elstat directly via phone or email. They should be able to provide you with a digital copy or inform you of any available resources.