How to Use "F6flpy-x64-non-vmd.zip" to Fix Missing Drives During Windows Install
(located at the bottom of the screen).
Modern computer processors, especially Intel 11th Gen to 14th Gen Core processors, use advanced storage controllers to manage high-speed NVMe SSDs. Windows installation media often lacks the built-in, native drivers required to communicate with these newer controllers.
: Modern Windows installers often lack the specific drivers needed to communicate with certain Intel storage controllers. This package contains the files (specifically iaStorAC.inf ) required for the "Load Driver" stage of the installation. Platform Specificity : Typically for desktop systems or older hardware.
The file contains the Intel RST VMD Pre-Installation Driver (64-bit) for Windows. "F6" refers to the legacy Windows installation process where you press F6 to load third-party RAID or SCSI controllers. Non-VMD vs. VMD Drivers Download File F6flpy-x64-non-vmd.zip
Building or reinstalling Windows on a modern PC can be an unexpectedly frustrating experience. You boot from your installation USB drive, the Windows setup screen appears, and everything looks perfect—until you reach the screen. Instead of your brand-new NVMe SSD, you see a blank list and an error message: “ We couldn’t find any drives. To get a storage driver, click Load driver.”
Required when your motherboard or BIOS has Intel VMD technology disabled, or for standard SATA/NVMe storage configurations on desktop systems.
The solution is to , a driver package designed to bridge this gap. This article will explain what this file does, where to download it safely, and how to use it during your Windows installation. What is F6flpy-x64-non-vmd.zip?
To avoid malware, always obtain drivers from reputable sources. How to Use "F6flpy-x64-non-vmd
: Your hard drive or SSD should now appear in the list. ⚠️ Safety and Sources
When installing Windows on modern systems, the installation media sometimes lacks the specific drivers needed to communicate with your storage controller. The "Non-VMD" version is typically intended for desktop platforms or systems where is disabled in the BIOS. How to Download and Use it
Since the direct .zip is hard to find, you usually have to extract the drivers yourself from the official installer:
I can find the direct, official link for your specific hardware. : Modern Windows installers often lack the specific
The file F6flpy-x64-non-vmd.zip is a driver package for used during Windows installation to detect drives on systems without Intel VMD (Volume Management Device) enabled.
Repeat the Load Driver step, but this time check the box "Hide drivers that are not compatible with this computer's hardware." Only one driver should remain.
Yes. The driver is compatible with both Windows 10 (64‑bit) and Windows 11, as long as the hardware platform matches.
Download the F6flpy-x64-non-vmd.zip file from a reliable source. Extract the ZIP archive onto a USB flash drive. It is helpful to create a folder named something simple, such as “Drivers” or “Intel”, and place the extracted driver files inside.
The entire need for these drivers arises from the storage controller being set to or Intel RST with Optane mode in the BIOS. If you are unable to get the driver to load, you have a simpler alternative: