Dlusb-c120.exe Verified (2027)

100 lumens (plugged into AC) or 75 lumens (powered only by USB). Resolution: 1280 x 800 (WXGA). Input: USB only.

The software relies on the computer's USB bandwidth and works with both connections. It is compatible with Windows XP (SP3 or later), Windows Vista, and Windows 7 (both 32-bit and 64-bit editions). It is not officially supported on Mac OS, Android, or Chrome OS.

If you are experiencing issues, sometimes the issue is that the device requires a high-power USB port to run correctly, particularly for maximum brightness.

Without this file, your computer would not know how to correctly interpret the data stream sent to the Acer C120, and the projector would not function as intended.

The "DL" in the filename often stands for or "Driver Loader" , while "USB-C120" refers to a specific driver package version or a device profile for a USB-to-serial chipset—commonly the CP210x family. dlusb-c120.exe

A: Yes, you can remove the file if you no longer use the Acer C120 projector. Since it is not a Windows system file, its removal will not harm your operating system. However, if you plan to use the projector again, you will need to re-install the software, as this file is necessary for it to function.

Usually located on the virtual drive that appears upon plugging the projector in, or it can be downloaded from Acer's official support site. Common Issues with dlusb-c120.exe

The legitimate dlusb-c120.exe file is completely safe and necessary for your external hardware to function. However, malware writers frequently disguise malicious files by naming them after legitimate system or driver processes. Red Flags to Watch For

Connect the USB cable directly to the laptop, not a USB hub. 100 lumens (plugged into AC) or 75 lumens

: Once the software runs, the "Acer DisplayPal" icon should appear in your system tray, and your screen image should project shortly after. Office Stationery Supplies Troubleshooting Common Issues

(e.g., set to Windows 7) to function on newer versions of Windows. Administrator Rights : The executable must typically be run as an administrator to initialize the display connection correctly. Autoplay Settings

At its core, dlusb_launcherC120.exe is an executable program file, meaning it contains instructions that your computer's processor can execute. It was developed by , a company specializing in display technologies. The file is the primary launcher for the Acer C120 USB Projector , a portable device that allows you to project your computer's screen using only a USB cable.

: The file helps manage brightness based on power source; the projector typically outputs 75 lumens on USB power alone and 100 lumens when using the AC adapter. Common Issues and Solutions The software relies on the computer's USB bandwidth

Device driver installer or control software interface.

Once the driver is installed, the executable is no longer needed. You can safely delete it. The actual driver files reside in C:\Windows\System32\drivers\ (e.g., silabenm.sys , silabser.sys ).

This file is typically an executable installer or a standalone utility used to facilitate data transfer between a PC and a device connected via the C-120 USB cable. These types of cables are often used to connect older legacy devices (such as older mobile phones, PDAs, or specialized industrial equipment) to a modern USB port.