D-bacs Setup-tool Download ((full)) Jun 2026

Connect your PC to the controller using a standard Ethernet cable or a dedicated USB-to-P1/P2 service tool interface.

If you exhaust every search for and cannot locate a working installer, consider these modern alternatives that work with Drobo’s SMB/CIFS shares:

D-BACS was released in several iterations. The last stable versions are:

Locate the small physical toggle toggle near the RJ-45 Ethernet network port. d-bacs setup-tool download

: The PC must be on the same subnet as the default or configured IP address of the gateway (often 192.168.1.x). Daikin Comfort step-by-step instructions

Set your PC’s network adapter to a static IP address within the same subnet as the Daikin controller (e.g., if the controller is 192.168.1.100 , set your PC to 192.168.1.50 ).

For macOS Catalina or later, you must boot into Recovery Mode, reduce security policy, and manually approve the kernel extension – a process detailed in the r/drobo guides. Connect your PC to the controller using a

If you are unable to obtain the specific D-BACS tool, industry professionals often use generic BACnet browsers to view and control points once the IP is established:

: Reads real-time thermodynamic metrics, error states, and telemetry data from individual air conditioning units.

If the D-BACS tool cannot connect, verify your RS-232 port settings (often 19,200 baud rate) and ensure that the DIII-Net wiring is properly terminated (120Ω resistor). : The PC must be on the same

Connect your laptop to the Daikin Gateway, usually via an RS-232 cable or IP address, depending on the model (DMS502B51/B71).

Authorized installers can usually find the setup tool, along with other PC-based commissioning software, on the official Daikin partner portal (e.g., Daikin City Included with Interface Modules: