| Metric | Delcos 1000 | Bis Manual Top (single deck) | | :--- | :--- | :--- | | | 10–20 trays (depending on model) | 1–2 trays per deck | | Typical batch size | 50–200 loaves or 20–50 pastry sheets | 4–10 loaves or 2–6 pastry sheets | | Continuous baking | High – load one rack while another bakes | Low – requires manual unloading/reloading |
Displays the remaining hours until the next service (oil, oil filter, air filter). Operating Mode: Select between Automatic Operation ( Autcap A u t ) and Continuous Operation ( Cntcap C n t Factory Settings: Restore default factory parameters. Setting the Pressure Band Access the menu and navigate to [Mains Pressure] . key to edit.
Disadvantages:
Press the RESET button to acknowledge and clear faults after the issue is resolved. 5. Optimal Configuration for Energy Efficiency For maximum energy savings, the Delcos 1000 should be configured to match site demand. compair delcos 1000 bis manual top
Displays permanent operational data such as final compression temperature, final compression pressure, and network pressure.
Indicates high pressure differential across the separator element.
The CompAir Delcos 1000 BIS Manual Top comes with a comprehensive warranty that covers parts and labor for a specified period. The warranty period varies depending on the region and country. | Metric | Delcos 1000 | Bis Manual
: Navigates through the main selection menu branches and adjusts user parameters.
Configure the "Automatic re-start" and "stop" parameters (5.1.5, 5.1.6) to reduce idling times during low-demand periods. 6. Accessing the Official Delcos 1000 Manual
When the blinking code prompt appears, use the and [ + ] keys to select the factory service code. key to edit
is an electronic monitoring system designed for user-friendly operation. It manages the operating cycle, monitors safety sensors, displays system status, and provides diagnostic information to prevent premature component failure.
: Critical malfunction tracking motor over-temperature conditions.
Press the key. The motor will start, and the system will enter load mode once it reaches operating speed 1.2.1. Stopping the Unit Press the 0 key.