Cat9kv-prd-17.12.01prd9.qcow2 Page

Before deploying the .qcow2 image, ensure your underlying host platform meets Cisco’s minimum specifications for control and data plane stability. Minimum Specification (Lab) Recommended Specification (Production) QEMU/KVM, Proxmox VE, EVE-NG, GNS3 Red Hat Enterprise Linux KVM, Nutanix AHV vCPUs 2 vCPUs (1 Control, 1 Data) 4 to 8 vCPUs (Dedicated pinning) RAM 8 GB to 16 GB Disk Space 8 GB (Thin provisioned) 16 GB+ (Thick provisioned for logging) NIC Drivers SR-IOV (Single Root I/O Virtualization) or Intel vmxnet3 Step-by-Step Deployment on KVM / Linux CLI

: Built-in optimizations for AWS, Microsoft Azure, and Google Cloud Platform overlay architectures. 3. System Requirements & Resource Provisioning

The virtual router will initialize its components on the first boot, which can take several minutes as it structures the non-volatile filesystem. Connect to the serial console interface using virsh : virsh console cat9kv-router1 Use code with caution. cat9kv-prd-17.12.01prd9.qcow2

: Integrates Cisco TrustSec, MACsec-equivalent virtual encryption, and next-generation firewall capabilities.

: The image is heavy; expect several minutes for the switch and its interfaces to become fully operational after the initial boot. Known Issues & Considerations Interface Stability Before deploying the

This is a that is not officially supported for production use. You may encounter stability issues, especially when pushing traffic.

Despite its beta status, the Catalyst 9000v opens up several powerful possibilities: : The image is heavy; expect several minutes

Virtual environments face evolving threats. This image includes built-in zone-based firewalls, Snort-powered IPS/IDS, URL filtering, and Cisco Secure Endpoint integration to protect data straight at the virtual edge. 3. Multi-Cloud Connectivity

: Production-grade image, indicating it is stabilized for live deployment rather than engineering labs.

The command show version will then confirm that network-advantage and dna-advantage licenses are active on the next boot.

Router> enable Router# configure terminal Router(config)# hostname Cat8kV-Virtual Cat8kV-Virtual(config)# interface GigabitEthernet1 Cat8kV-Virtual(config-if)# ip address 192.168.122.50 255.255.255.0 Cat8kV-Virtual(config-if)# no shutdown Cat8kV-Virtual(config-if)# exit Cat8kV-Virtual(config)# ip route 0.0.0.0 0.0.0.0 192.168.122.1 Use code with caution. 2. Secure Management Access (SSH)