To ensure you have the exact match for your specific nursery setup, let me know if you need help with for missing pieces, finding the exact dimensions for a replacement mattress, or locating compatible conversion rails online. Share public link
The stabilizer bar provides essential structural integrity. Insert barrel nuts into the bar’s pre-drilled holes, aligning them to capture the incoming bolts. Use 3 1/8" bolts and nylon washers to secure the bar between the two side panels. 3. Attach the Mattress Support
Disassemble the crib entirely. Set aside the front footboard and the back headboard.
Tip: Use the Allen wrench to ensure all bolts are secure, but do not overtighten until the final step. Step 2: Install the Mattress Support Locate the metal mattress support base.
Short bolts (approx. 3/4 inch) for the mattress spring frame. bonavita hudson ii lifestyle crib instructions
Wipe down the wood surfaces using a soft cloth dampened with warm water and mild soap. Avoid harsh chemical cleaners or abrasive pads that strip the non-toxic finish.
Locate the four adjustable height holes on the inside corners of the side panels.
Align the shorter front footboard with the open ends of the left and right side panels.
Always install hardware . Do not fully tighten any bolts until the entire frame is connected. This prevents wood warping and ensures holes align perfectly. Step 1: Connect the Back Panel to the Side Panels Stand the Back Panel (Headboard) upright. Align the Left Side Panel perpendicular to the back panel. To ensure you have the exact match for
Approximately 18 months to 3 years (or when your child attempts to climb out).
: Hidden inserts that slide into the wood to receive and lock the bolts.
Insert the remaining long Allen bolts through the corner frames into the front panel.
The Bonavita Hudson II has been subject to safety recalls in the past, specifically regarding the drop-side hardware . Use 3 1/8" bolts and nylon washers to
The defining feature of the Bonavita Hudson II is its ability to transition through four distinct stages as your child grows. 1. Toddler Bed Conversion
Key features of this model include:
The is a versatile 4-in-1 convertible crib designed to transition from a crib to a toddler bed, daybed, and eventually a full-size bed. To ensure the safety of your child, it is critical to follow the assembly steps meticulously and avoid using power tools, which can damage the wood. Required Tools & Preparation Included: Allen Wrench . Not Included: Phillips Head Screwdriver .
Short bolts specifically for securing the metal spring frame. Allen Wrench: The primary tool required for tightening. 3. Step-by-Step Assembly Instructions
The Bonavita Hudson II Lifestyle Crib is a popular, high-quality furniture piece designed to grow with your child. Because it converts from a crib into a toddler bed, daybed, and full-size bed, keeping the instructions handy over the years is essential.