Software stack
Do not share COM between different power transformers on same MSTP segment.
becsys5_vX.X.X.bin
: Anchor the bypass loops using dedicated ball valves, sample draw valves, and high-precision pressure gauges on both the intake and discharge ends.
: Includes pH (0–14 range), ORP (-1000 to +1000 mV), and temperature (32–150 °F). becsys5 installation and technical manual
: Before any electrical work, mount the controller and install the flow cell plumbing. The system must be pressure tested to ensure there are no leaks in the sample stream.
: The relay stays completely on until the water hits the set point, then cuts off entirely. Software stack Do not share COM between different
: Includes programmable "Manual-On" limits that automatically return overrides to automatic control to prevent overfeeding chemicals.
Wire the thermistor or RTD sensor to the dedicated temperature terminal block. Chemical Feed Outputs : Before any electrical work, mount the controller
Keep pH and ORP sensors clean and free of debris.
Software stack
Do not share COM between different power transformers on same MSTP segment.
becsys5_vX.X.X.bin
: Anchor the bypass loops using dedicated ball valves, sample draw valves, and high-precision pressure gauges on both the intake and discharge ends.
: Includes pH (0–14 range), ORP (-1000 to +1000 mV), and temperature (32–150 °F).
: Before any electrical work, mount the controller and install the flow cell plumbing. The system must be pressure tested to ensure there are no leaks in the sample stream.
: The relay stays completely on until the water hits the set point, then cuts off entirely.
: Includes programmable "Manual-On" limits that automatically return overrides to automatic control to prevent overfeeding chemicals.
Wire the thermistor or RTD sensor to the dedicated temperature terminal block. Chemical Feed Outputs
Keep pH and ORP sensors clean and free of debris.