Click the button on the right side of the panel. If prompted for a password, leave the field completely blank and click enter. Configure these key tabs:
: Uses a specialized "Block Mode" to skip or reallocate damaged sections of NAND flash chips to extend the life of "bad" flash memory. Performance Optimization
Click OK or Save to apply the configuration modifications and return to the primary dashboard.
Remember that mass production formatting deletes 100% of the files remaining on the chip. Always use this utility as a hardware recovery solution after you have abandoned hope of recovering existing data. Alcor Micro Au6989sn Mptool
Here’s a technical write-up on the and its associated MPTool (Mass Production Tool), aimed at users flashing USB flash drives or recovering corrupted controllers.
Plug your corrupted USB flash drive into the computer. The software should automatically detect the drive and assign it to one of the visual grid slots (e.g., Box 1). If it displays information regarding your Flash ID, the software is compatible. 3. Access Setup Configurations
: The version of MPTool you are using does not have the database entries for your specific NAND chip. Click the button on the right side of the panel
In the world of USB flash drive controllers, is a giant. You may not recognize the name, but if you have ever owned a budget-friendly or promotional USB 2.0 flash drive, chances are high it was powered by an Alcor chip. Among their most ubiquitous controller models is the AU6989SN .
The Alcor Micro AU6989SN MPTool is a low-level proprietary utility designed for industrial flashing, testing, and formatting of USB flash drives that use Alcor Micro microcontrollers.
This will erase ALL DATA . This is a low-level format. Recovery after this is impossible. Performance Optimization Click OK or Save to apply
Alcor Micro distributes its flashing packages under two main software lines available on aggregate firmware archives like USBDev.ru :
– This free tool reads the USB descriptor data. Step 2: Insert your faulty USB drive. Step 3: Look for the following lines in ChipGenius: