Most ACHI machines use the or PL2303 chipset. Download and install the corresponding driver. Once installed, note the assigned port number (e.g., COM3 ). Step 2: Install ACHI IR Soft
Because the Achi IR6500 uses the popular Altec PC410 temperature controller for its top heater, any software compatible with the PC410 protocol can operate the machine.
Go to the tab, check Run this program as an administrator , and set compatibility mode to Windows 7 if you are running Windows 10 or 11. Click Apply. Setting Up Communication Launch the software. Navigate to the Communication Settings or Port Setup menu. achi ir6500 software
The system also features a closed-loop temperature control system and can easily handle lead-free soldering rework, which requires precise temperature management.
Before installing the software, you must ensure your computer can communicate with the rework station's USB/Serial interface. System Requirements Most ACHI machines use the or PL2303 chipset
The original software suite for older firmware revisions. It is lightweight but lacks modern reporting templates.
Peak temperature should hit roughly 245°C - 250°C . ⚠️ Troubleshooting Connection Issues Step 2: Install ACHI IR Soft Because the
What (Windows 10, 11, etc.) is your computer running? Are you working with leaded or lead-free solder? Do you already have the original software install files , or
Check and set compatibility mode to Windows 7 (highly recommended for modern Windows 10/11 environments). Launch the software. Step 3: Configure Communication Settings
Most Achi IR6500 stations utilize a or PL2303 USB-to-Serial internal converter.
