A4988 Proteus Library Here

Compile the code in the Arduino IDE and export the compiled binary ( .hex file). Double-click the Arduino Uno component inside Proteus.

(Requires its own Proteus library if not present) A4988 Stepper Driver (The newly added component) a4988 proteus library

The library package generally consists of two primary file types required for the simulation to function: Compile the code in the Arduino IDE and

C:\Program Files (x86)\Labcenter Electronics\Proteus 7 Professional\LIBRARY Step 3: Restart Proteus The A4988 is a widely used stepper motor driver carrier

Simulating stepper motor circuits saves time and prevents hardware damage. The A4988 is a widely used stepper motor driver carrier. Proteus Design Suite does not include a native, dedicated A4988 simulation model in its default component library.

A video tutorial for the pouryafaraz library is mentioned for user guidance.

// Pin definitions const int stepPin = 2; const int dirPin = 3; void setup() // Set the control pins as outputs pinMode(stepPin, OUTPUT); pinMode(dirPin, OUTPUT); void loop() // Set rotation direction Clockwise digitalWrite(dirPin, HIGH); // Spin the motor 200 steps (one full revolution in full-step mode) for(int x = 0; x < 200; x++) digitalWrite(stepPin, HIGH); delayMicroseconds(1000); // Determines the speed of rotation digitalWrite(stepPin, LOW); delayMicroseconds(1000); delay(1000); // Wait one second // Change rotation direction Counter-Clockwise digitalWrite(dirPin, LOW); // Spin the motor 200 steps for(int x = 0; x < 200; x++) digitalWrite(stepPin, HIGH); delayMicroseconds(1000); digitalWrite(stepPin, LOW); delayMicroseconds(1000); delay(1000); // Wait one second Use code with caution. Loading the Hex File into Proteus Compile the code in the Arduino IDE.