: Plug the drive directly into a USB port on the back of the motherboard, not a hub.
This means the physical USB stick is plugged in, but the controller firmware is corrupted or the flash memory chip has failed. Causes of the 13FE USB Device "No Media" Problem
The only way to fix a "No Media" error is to reflash the controller. 13fe usb disk 50x usb device
– Some generic drives have been found preloaded with malware (USB Rubber Ducky style or hidden partitions).
For the average user, encountering this error typically marks the end of the drive's life. While advanced users can attempt a low-level format using Phison MPALL to get the drive working again (at the cost of all data), the safest course of action is to replace the drive immediately and restore data from a backup. If you see 13fe and 50X in your device manager, prepare for the worst, but hope for a fix via specialized tools. Remember: this identifier hides the true manufacturer (Phison) behind the branding, revealing the engineering reality inside your plastic casing. : Plug the drive directly into a USB
Drives identified as "13FE USB DISK 50X" generally fall under the protocols. Detailed hardware snapshots usually reveal the following: Vendor ID (VID): 13FE Product ID (PID): Often 5100, 5200, or 5500
Open (Right-click Start -> Disk Management). – Some generic drives have been found preloaded
Right-click it in Device Manager and select "Update driver" to ensure Windows isn't using a stale generic version.
You plug the drive in, you hear the connection sound, but you cannot see the drive letter (e.g., E: or F:) to save files. The Solution:
: Broken soldering or failure in the memory chip.
If you have plugged a USB flash drive into your computer and encountered an error where the device shows up in Device Manager as (often accompanied by "No Media" or "Please insert a disk into USB Drive" errors), you are likely facing a common but frustrating hardware controller issue.